1 amplifier, power, 1.2 w 10 - 13.3 ghz rev. v1 maap-008924 ? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. features ?? oip3: 44 dbm ?? gain: 20 db ?? p1db: 31 db ?? lead-free 5 mm 20-lead pqfn package ?? halogen-free ?green? mold compound ?? rohs* compliant and 260c reflow compatible ?? class 1c esd rating description the maap-008924 is a 3-stage, high linearity 1.2 w gaas power amplifier in a 5mm, 20 lead pqfn package, allowing easy assembly. this pa product is fully matched to 50 ohms on both the input and output. it can be used as a power amplifier stage or as a driver stage in high power applications. it is ideally suited for point-to-point radios. each device is 100% rf tested to ensure performance compliance. the part is fabricated using m/a-com technology solutions? high linearity mesfet process. ordering information 1 part number package MAAP-008924-TR0500 500 piece reel maap-008924-tr1000 1000 piece reel maap-008924-001smb sample board * restrictions on hazardous substanc es, european union directive 2002/95/ec. functional schematic pin configuration 2,3 pin no. function pin no. function 1 no connect 11 no connect 2 no connect 12 no connect 3 rf in 13 rf out 4 no connect 14 no connect 5 no connect 15 no connect 6 v g 1 16 v d 3 7 no connect 17 no connect 8 v g 2 18 v d 2 9 no connect 19 no connect 10 v g 3 20 v d 1 1. reference application note m513 for reel size information. 2. m/a-com technology solutions recommends connecting unused package pins to ground. 3. the exposed pad centered on the package bottom must be connected to rf and dc ground.
2 amplifier, power, 1.2 w 10 - 13.3 ghz rev. v1 maap-008924 ? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. parameter test conditions units min. typ. max. small signal gain 10 ghz 11.7 ghz 13.3 ghz db ? ? 20 21 20 22 ? ? ? input return loss ? db ? 12 ? output return loss ? db ? 10 ? noise figure ? db ? 7 ? p1db ? dbm ? 31 ? oip3 10 ghz, @ 15 dbm / tone 11.7 ghz, @ 15 dbm / tone 13.3 ghz, @ 15 dbm / tone dbm ? ? 39 42 44 41 ? ? ? p sat ? dbm ? 32 ? current, p out = 31 dbm i dd ma ? 1100 ? electrical specifications: freq. 10 - 13.3 ghz, v dd = 6 v, i dq = 1000 ma 4 , z 0 = 50 ? maximum operating ratings 5,6 parameter absolute maximum input power +12 dbm drain supply voltage +7 volts operating temperature -40c to +85c junction temperature 7,8 +150c storage temperature -55c to +150c 4. set v gg to ?1.5 v prior to applying v dd, once v dd is applied adjust v gg to achieve specific idq. 5. exceeding any one or combination of these limits may cause permanent damage to this device. 6. m/a-com technology solutions does not recommend sustained operation near these survivability limits. 7. operating at nominal conditions with t j +150c will ensure mttf > 1 x 10 6 hours. 8. junction temperature (t j ) = t c + ? jc * ((v * i) - (p out - p in )) typical thermal resistance ( ? jc) = 9.1c/w. a) for t c = 25c, t j = 74c @ 6 v, 1100 ma, p out = 31 dbm, p in = 11 dbm b) for t c = 85c, t j =134c @ 6 v, 1100 ma, p out = 31 dbm, p in = 11 dbm handling procedures please observe the following precautions to avoid damage: static sensitivity gallium arsenide integrated circuits are sensitive to electrostatic discharge (esd) and can be damaged by static electricity. proper esd control techniques should be used when handling these class 1c devices.
3 amplifier, power, 1.2 w 10 - 13.3 ghz rev. v1 maap-008924 ? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. typical performance curves input return loss output return loss noise figure p1db output ip3 @ 10 ghz gain 30 35 40 45 50 55 60 8 10121416182022242628 +25 c -40 c +85 c output power (dbm) 10 15 20 25 30 10.0 10.5 11.0 11.5 12.0 12.5 13.0 13.5 +25 c -40 c +85 c frequency (ghz) -25 -20 -15 -10 -5 0 10.0 10.5 11.0 11.5 12.0 12.5 13.0 13.5 +25 c -40 c +85 c frequency (ghz) -35 -30 -25 -20 -15 -10 -5 0 10.0 10.5 11.0 11.5 12.0 12.5 13.0 13.5 +25 c -40 c +85 c frequency (ghz) 1 2 3 4 5 6 7 8 9 10.0 10.5 11.0 11.5 12.0 12.5 13.0 13.5 +25 c -40 c +85 c frequency (ghz) 25 26 27 28 29 30 31 32 33 34 35 10.0 10.5 11.0 11.5 12.0 12.5 13.0 13.5 +25 c -40 c +85 c frequency (ghz)
4 amplifier, power, 1.2 w 10 - 13.3 ghz rev. v1 maap-008924 ? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. ? reference application note s2083 for l ead-free solder reflow recommendations. meets jedec moisture sensitivity level 1 requirements. plating is 100% matte tin over copper. lead-free 5 mm 20-lead pqfn ? typical performance curves (cont.) output ip3 @ 11.7 ghz output ip3 @ 13.3 ghz 30 35 40 45 50 55 60 8 10121416182022242628 +25 c -40 c +85 c output power (dbm) 30 35 40 45 50 55 60 8 10121416182022242628 +25 c -40 c +85 c output power (dbm)
|
